1- Extrusion Line #3to include (** components may be sold separately **):

• 2 - MGS 72” Shaftless Payoffs, Model POSL-72, #169-RH-SP, #141-LH-SP
• Guide Stand
• STERLING/DAVIS ELECTRIC 50’ Overhead Payoff Accumulator, 32” root dia. Sheaves, 6x5, 2” W x 1.5” D ‘U’ grooves
• DAVIS STANDARD 6” 24:1 L/D Extruder, Water Cooled, Model 600S, #G1954, S.O. #90621-C, 17.21:1 Gearbox Ratio, Screw, Crosshead, Motor
• System 301Master Temperature Panel
• Master Temperature Panel, 8-Zone RED LION Controllers
• LASER MIKE Diameter Controller, Model 182-30-07, w/ 2 - Scanner Heads, Model 501-195, Model 135-325-05 - 10’ and 20’ Split Double Pass Water Trough w/32” Capstans, BALDOR 7.5HP DC Motor - CLINTON Model STA Spark Tester, w/Bead Box
• BARTELL 60” Continuous Belt Caterpuller Capstan, 3” wide Belt, EATON 7.5HP Dynamatic Motor
• 60’ Overhead Take-up Accumulator, 24” root dia. flat bottom Sheaves, 4x4, 1.5” W x 1.5’ D, w/QuadTrak Counter
• 2 - BARTELL 60” Shaftless Take-ups, 7.5HP Dynamatic Motors
• 1 - DAVIS STANDARD 6” 24:1 L/D Extruder, Water Cooled , Model 600S G-1593, S.O. #90621-C, ETS Rebuild #99616, 9/86, Screw, EMERSON 250HP DC Motor, 500/300v/1750rpm, Less Crosshead; System 301 Master Temperature Panel; w/3 - AEC Gravimetric Hopper Loaders (Compound, Foam, Color) w/QL Series Weight Loss Controller, Model 270EC Extruder Control and Alarm
• 1 - DAVIS STANDARD 6” 24:1 L/D Extruder, Water Cooled, Model 600S, #G-3485, S.O. #91017-C, 28:46:1 Gearbox Ratio, with New Barrel and New Screw; RELIANCE 250HP Motor
• 1 - DAVIS STANDARD 4.5” 24:1 L/D Extruder, Model 450S, #77131, S.O. #49295-C, 17.3 Gearbox Ratio, Crosshead

1 Extrusion Line #4, to include (** components may be sold separately **):

• DAVIS STANDARD 3.5” 24:1 L/D Extruder, Model 350S, #G6810, S.O. #51748-P, 17.39:1 Gearbox Ratio, Water Cooled, Screw, Crosshead, RELIANCE 125HP Motor (requires new Drive); Color Meter
• System 301 Master Temperature Panel
• TEC 2.5” 20:1 L/D Nylon Extruder, Model 2520S, BALDOR 25HP DC Motor; UNA DYN Model DS Dry Spot Dryer, 50 lb. Hopper, Loader
• LASER MIKE Diameter Controller, Model 182-30, w/ 2 - Scanner Heads, Model 501-195
• 10’ and 20’ Water Trough, Stands
• 16” Dual Wheel Capstan, Motor
• CLINTON Model HF-20-E Spark Tester Controller, #3445, w/Bead Box, #HFEBD-12, #E2936
• 2 - ROYLE 3.5” 20:1 L/D Extruders, #3 Gearboxes, Clamps, less Crossheads
• 1 - NELMOR 2.5” 20:1 L/D Nylon Extruder, Model 2520, #7504-394; BALDOR 25HP DC Motor, 500/150-300v ( No Motor Drive)
• 1 - TEC 2.5” 20:1 L/D Nylon Extruder, Model 2520, #7504-394; BALDOR 25HP DC Motor, 500/150-300v ( No Motor Drive)